Your Ranger may be a small truck but that doesn’t mean it has to suffer in the strength department. Grab yourself a bumper winch for your Ranger and give it even more towing power.
A winch bumper for your Ford Ranger could run you up to close to a thousand dollars. You can however, with a little searching, find all that you need without blowing last weeks paycheck.
A website I found that can help you find all the parts you could possibly need is AutoAnything. They have your Ford Ranger winch mounts, your winches and all of the accessories your could possibly need to get your winch and the mount hooked up to your Ford Ranger pickup.
AutoAnything also offers some of the industries most trusted parts for your Ford Ranger including ARB, CURT and Smittybilt.
Aries floor liners are high quality, durable, synthetic rubber floor liners that can be used in almost any truck.
An Aries floor liner will fit in your Chevrolet, Ford or Dodge truck. They will cover most of the floor with their non-toxic blended rubbers that were moulded into a perfect custom fit with pressure injection tooling. The Aries floor liners coming with two front pieces, 3mm thick for that heavy duty feel. A single rear piece is also provided by Aries to cover up the back of your quad-cab. The OEM textured non-slip surface will ensure that your mats will stay in place for a long time to come.
Aries floor liners are available now in black, grey or tan to perfectly accent any truck interior.
A Smarty Programmer is a little handheld device that you can use to tap into your trucks on board computer system and modify the fuel injection system. Doing so will allow you to get more power out of your truck, more torque and even a better driving experience all without sacrificing your vehicles warranty or the emissions output.
The Smarty Jr Programmer is compatible with Dodge RAM 5.9 L 2003-2007 trucks. The device was tested in house and Mads Electronics, the maker of the device, claims it could potentially give you up to another 100 HP on top of stock.
The Smarty Jr Programmer is simple and easy to use. Within a short period of time you can kick your Dodge RAM up a couple of notches and make it feel like a whole new ride.
If you’re out on the country roads often or you want to give your Honda Ridegline a more “meatier” look then you’ll probably want to get yourself a bull bar.
Bull bars for the Honda Ridgeline are available in a variety of shapes and sizes but by far the best one that I have come across is the Ultimate Bull Bar by Westin. This bull bar is on the pricier side compared to some of the other ones that are out there on the market but it is a sleek design and will make your Honda Ridgeline stand out.
Alternatives can be found on eBay if you would like to save yourself a little cash. Another place that I found which aggregates Honda Ridgeline bull bar providers is Calibex.
The SEM Rock-It Spray-in Truck Bed Liner is a great product. From experiences I can tell you that it is a very easy to use product. If you buy the kit with the gun you are good to go. Lots of prep is needed to use the product but once you get everything covered up you are good to start spraying.
The product was very easy to mix together and even easier to apply with the supplied gun. The texture comes out a little, but not too, coarse. It won’t wreck anything you put in there but it may give out a few grazes.
For the price the SEM Rock-it Truck Bed Liner is worth the money.
A Ford Raptor is a nice truck and it deserves an equally nice bed liner. When it comes to looking for a Ford Raptor bed liner you have a lot of choices to make and companies to choose from. If you’re going to do this yourself you really need to make sure you prep your truck well. Numerous users on the F150 Online forum said that prepping is the most important step as not doing so could end with bed liner all over your Ford Raptor.
If you think you can handle the prep and you want to give the Ford Raptor a new bed liner yourself then comes the hard part, deciding whose product to use.
Many people recommend the BedRug but I feel that this could get messy as it is essentially a carpet in your truck bed. Any spills on that thing could make your entire vehicle look a mess. On the other hand, a BedRug is a lot easier to get in there than a spray on bed liner so if you’d want to save yourself the prep effort the BedRug in your Raptor may be a good way to go.
Many people on the same forum also recommend Herculiner and DualLiner. Both require lots of prep to ensure that you don’t spray bed liner all up the side of your Ford Raptor.
Grizzly Grip bed liners for your truck are available in two different styles. Grizzly offers and AROMATIC urethane which is perfect for those that will definitely give that truck bed a lot of work, the color will unfortunately fade much quicker than their alternative the ALIPHATIC urethane. The ALIPHATIC urethane will not fade or yellow over time but it will have a little less in the strength department as compared to the Grizzly AROMATIC urethane.
Both types of Grizzly Grip bed liners are available in numerous colors. If you’re looking for black they have it, they also have red, tan, yellow and a variety of camouflage colors so you can get that perfect look for your truck. With 24 colors in total and your choice between a fine or coarse truck bed you can’t possibly go wrong with a Grizzly Grip truck bed liner.
Check out Grizzly Grip’s website if you’re thinking about buying.
Maybe a black truck liner just isn’t your style or perhaps it just doesn’t blend in with your truck too well. Let’s take a look at where we can find tan colored roll on bed liner.
Monstaliner offers a variety of colors in roll-on methods. The kit is available in one and two gallon sizes and at a reasonable price. And yes, they do have tan colored roll-on bed liner.
HERCULINER once again offers a variety of colors in roll on methods and they are definitely worth a look.
Dupli-color has long been a leader in automotive paint and automotive paint supplies and if I were looking for a new roll-out truck bed I’d probably give these guys a look.
Make sure you protect your truck bed and keep it ready to carry for years to come with a Duraliner truck bed liner. The Duraliner is one of America’s most popular bed liners that can be custom moulded to your truck manufacturers specifications. The liner is seamlessly constructed from anti skid materials which will keep your cargo in place on long or short journeys.
Unlike with most other bed liners there is very little work to be done when getting going with your Duraliner. You just drop the Duraliner in place and within a few minutes you are ready to start hauling. The liner resists chemicals and oils which ensures a long life for your truck bed and protection for the truck underneath it.
If you’re having a hard time deciding between a spray on bed liner or a tough and durable Duraliner then consider these few facts. A Duraliner can resist up to 483 ft. pounds of force, a spray on is closer to 67 ft. pounds of force. That means you can get a little more heavy handed in the loading of your cargo with a Duraliner. Doing the same with a spray on could result in massive dents to your truck bed.
A Duraliner truck bed is also fully recyclable, you can do a little bit for the environment once you’re all finished up with your truck. A spray on bed liner may even impair the ability to recycle the sheet metal.
If you want my opinion, the Duraliner is the way to go. They require little effort to install and they can do much more in terms of protecting your truck.
If you are in Sarasota and are looking for a spray on truck bed liner, you are in luck. There are a few spray on bedliner shops within the area. The first one, one of my favorites, is Line X of Sarasota. Here is their information:
Line-X of Sarasota
Phone: (941) 527 – 1387
5115 15th street east
Bradenton, FL 34203
If you would rather go with Rhino Liner, here is their contact information:
Rhino Linings of Manatee / Sarasota
Phone: (941) 739-9969
4724 53rd Avenue East
Bradenton, FL
For those of you in Sarasota, we hope this is helpful.